Technical article 101589

3C590 network card doesn't start up correctly when going to multiuser mode.

OpenServer 5.0.0OpenServer 5.0.2

Written · Last revised

Problem

The SCO Advanced Hardware Supplement (AHS) Release 5.2.0 network driver for the 3Com 3C590 adapter will fail at startup when used with the newer 8KB 'FIFO' adapters.

The following 3Com model numbers are affected:

3C590-Combo 03-0046-010
3C590-TPO 03-0046-110

Solution

To resolve this problem, a new 3C590 driver is available from the 3Com Customer Support web site at either:

http://infodeli.3com.com/infodeli/swlib/latest_adapter_files.htm
or,
ftp://ftp.3com.com/
NOTE:     The older 32KB adapters are not affected by this problem.

From the Xinuos technical article database, record 101589. Reproduced with permission. The original is at www.sco.com/ta/101589, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.