Technical article 111523

A fresh install of OpenServer 5.0.5 or 5.0.6 on top of a 5.0.5 or 5.0.6 system hangs.

OpenServer 5.0.5OpenServer 5.0.6

Written · Last revised

Problem

When doing a fresh installation of SCO OpenServer 5.0.5 or 5.0.6 on top of an SCO OpenServer 5.0.5 or 5.0.6 system, or OpenServer 5.0.6 on top of an existing OpenServer 5.0.5 system, the installation process hangs with this install progress message screen:

"Please wait while your SCSI disks are configured into the kernel...."

No data currently on your hard disk has been changed, the state of your hard disk is as it was before the installation was started, and the installation is hung at this point.

Solution

The workaround for this is to include "scsi.noscan" in the response
to the "boot:" prompt in the beginning of the installation.  If
you already need to type in a bootstring at that point in the
installation, "scsi.noscan" can be added to that.  If not, then
type the following after the "boot:" prompt during the beginning
of the installation:
defbootstr scsi.noscan

This will allow the fresh installation to proceed beyond the above screen without hanging.

NOTE:     This may apply to other IBM models and other OEM systems using
          the Adaptec 7892 SCSI HBA.

From the Xinuos technical article database, record 111523. Reproduced with permission. The original is at www.sco.com/ta/111523, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.