Technical article 100830

"Address already in use" when trying to use dbx, dbxtra, or dbXtra.

OpenServer 5.0.0

Written · Last revised

Problem

dbx (dbxtra, dbXtra) fails with the message "Fatal error: Address already in use" as soon as it is invoked.

Solution

This has been reported to SCO Engineering. In some cases, running the debugger as root will work, although a user will get the above error message. There are several other possible workarounds:

1. Kill all dbx processes, then restart the debugger session. First, find the process id of the dbx session(s) with the command:

ps -ef | grep -y dbx

This will return information similar to the following:

<username> <pid> <ppid>  0 14:34:24   ttyp1    00:00:01 dbXtra

where <pid> is the process id. Use this number with the kill(C) command to kill the debug session:

kill <pid>

2. If #1 fails, shut down the networking subsystem with the command:

tcp stop

Next, restart the networking subsystem with the command:

tcp start

3. If #2 fails, try rebooting the machine.

From the Xinuos technical article database, record 100830. Reproduced with permission. The original is at www.sco.com/ta/100830, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.