Technical article 105870

After configuring a secure web server, the error "prc_sync: Script (S90atlas) failed to complete in 120 seconds" appears at bootup.

OpenServer 5.0.4OpenServer 5.0.5OpenServer 5.0.6

Written · Last revised

Problem

After configuring a secure web server, the following message appears during bootup:

prc_sync: Script (S90atlas) failed to complete in 120 seconds

Solution

Secure web servers cannot be started automatically at boot time
as they require user input of a Key File Password.  A small
modification to the startup script will correct this.

Edit the /etc/rc2.d/S90atlas file and comment out the following line at the end of the file:

/bin/su root -c "/usr/internet/lib/ns_admin/webservers start ns_httpd"

By commenting out this line, non-secure web servers will be started at boot time by the /etc/rc2.d/S90fasttrack script, and secure servers will be ignored.

Once the system has booted, secure servers must be started manually.

This can be done by running the following command:

/usr/internet/lib/ns_admin/webservers start ns_httpd

Ignore any warnings about addresses already in use, and enter your Key File Password for each corresponding web server.

NOTE:     Running /etc/rc2.d/S90atlas manually should appear as:
# ./S90atlas
warning: daemon is running as super-user
startup: listening to port 620 as root
ns_httpd on 0.0.0.0 startup: listening to port 80 as nouser

From the Xinuos technical article database, record 105870. Reproduced with permission. The original is at www.sco.com/ta/105870, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.