Technical article 120443

After installing sendmail security fix CSSA-2003-SCO.6.1, relaying does not function properly

OpenServer 5.0.5OpenServer 5.0.6

Written · Last revised

Problem

After installing CSSA-2003-SCO.6.1, the anti-relaying functionality does not work anymore.

OR

After installing CSSA-2003-SCO.6.1, the access database is not used.

Cause

The CSSA-2003-SCO.6.1 security fix does not replace your /usr/lib/sendmail.cf file, the original sendmail.cf file is left in place. There is a new sendmail.cf file that gets installed on the system, but it must be put in place and reconfigured.

Solution

First, create a backup of your existing /usr/lib/sendmail.cf file:

# cp /usr/lib/sendmail.cf /usr/lib/sendmail.cf.orig
          Next, the updated sendmail.cf must be put in place. This new
          sendmail.cf is stored in the
          /opt/K/SCO/SendMail/8.11.0a/.softmgmt/var/lib/ directory. To put
	  this  new sendmail.cf file in place run these commands:
# cd /opt/K/SCO/SendMail/8.11.0a/.softmgmt/var/lib/
# cp sendmail.cf /usr/lib/sendmail.cf
          Now the sendmail.cf file must be reconfigured with information about
          your specific system. To do this run through "mkdev cf" and make
	  sure all settings are correctly established. After configuring all
	  the settings for your sendmail.cf file, generate a new sendmail.cf
          (selection 8 from the main mkdev cf menu). This will also restart
          sendmail, so the new changes will take effect without the system
          needing to be rebooted.
          Now that the new version of Sendmail is installed, the anti-relaying
          functionality is already in place by default. Mail clients may be
          receiving access denied or relaying denied messages. This new
	  version of sendmail uses a different anti-relaying database than
	  previous  versions of Sendmail that came with OpenServer 5.0.6
	  and before. This  new functionality will work on OpenServer 5.0.6
	  and 5.0.5, with this  new security fix in place. This new version
	  of Sendmail uses the  /usr/lib/mail/access file to specify trusted
	  hosts and known  spammers. This process is fully documented here:
http://docsrv.sco.com:8507/en/MailMsgG/sndmlCspam.html

This /usr/lib/mail/access file is empty by default. But a sample of this file is:

cyberspammer.com ERROR:"550 We don't accept mail from spammers"
okay.cyberspammer.com   OK
sendmail.org            RELAY
128.32                  RELAY
1:2:3:4:5:6:7           RELAY
[127.0.0.3]             OK
[1:2:3:4:5:6:7:8]       OK

Where 128.32 is an entire subnet that can be allowed to relay through this system. Also, specific domains can be sent specific error messages as seen in the first line. For more information, read

From the Xinuos technical article database, record 120443. Reproduced with permission. The original is at www.sco.com/ta/120443, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.