Technical article 105768

After OS install my system hangs when trying to add COM2 via SCOADMIN/HARDWARE.

OpenServer 5.0.4

Written · Last revised

Problem

I am trying to add COM2 via Scoadmin/Hardware. I have checked the cmos to see that it is enabled prior to entering Scoadmin. The procedure appears to go fine. I choose to relink and a screen returns saying that COM2 has been added successfully, press <Enter> to continue. I press <Enter> but the system is hung. I am forced to hit the reset button. Upon bootup it would appear that COM2 has been added successfully.

Solution

This problem has been reported to SCO Engineering.

See also

ta105819, "mkdev serial hangs looking for a second serial port."

From the Xinuos technical article database, record 105768. Reproduced with permission. The original is at www.sco.com/ta/105768, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.