Technical article 112881

After running mkdev apc, the APC UPS doesn't shut down my system properly.

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5OpenServer 5.0.6

Written · Last revised

Problem

After configuring my system with mkdev apc and rebooting I make sure that the ssd daemon is running. Then, as a test, I unplug the UPS AC power cable. I configured the utility to wait 7 minutes before it starts to shut down my system. However, I wait 10 minutes and the UPS never signals my system; I never get a shutdown message.

Solution

This has been reported to SCO Engineering.

NOTES:    Back-UPS Pro models are supported in "simple-signaling" mode
          only on SCO OpenServer 5.

See also

ta112761, "After running mkdev apc, my system automatically shuts down upon entering multiuser mode."

For information on your APC UPS and the proper cabling to use with your APC UPS and specific brand/version of operating system:

http://www.apcc.com

From the Xinuos technical article database, record 112881. Reproduced with permission. The original is at www.sco.com/ta/112881, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.