Problem
I have added a print form using lpforms and am now attempting to
mount and align the form using:/usr/lib/lpadmin -p printer_name -f form_name -M -aAfter pressing enter, an alignment pattern is printed and the following is displayed:
Press <Return> to print an alignment pattern, or q to quit:
I then attempt a second printing of the alignment pattern by pressing
return. No alignment pattern is printed and the following is
displayed again:Press <Return> to print an alignment pattern, or q to quit:
I press return again and no alignment pattern is printed and the following error is generated:
We were interrupted while printing the alignment pattern; check the printer. The form is mounted, so you will have to unmount it if you need to print more alignment patterns later.
Solution
This has been reported to SCO Engineering.