Technical article 100109

ARCserve is unable to access a supported tape drive with Adaptec 1522.

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5OpenServer 5.0.6

Written · Last revised

Problem

After installing SCO ARCserve with an SCO UNIX-based system that uses an Adaptec 152x or 151x controller using the SCO "smad" driver, SCO ARCserve is unable to access an SCO ARCserve supported tape drive.

On an SCO OpenServer 5.0.0 system using the "spad" driver, SCO ARCserve is able to successfully access any SCO ARCserve supported tape drive.

Solution

To work around this problem, use a different controller, such as an Adaptec 154x, 294x, 3940 or SCSI adapter from other manufacturers.

From the Xinuos technical article database, record 100109. Reproduced with permission. The original is at www.sco.com/ta/100109, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.