Problem
A tape drive that works with SCO OpenServer 5.0.0 or 5.0.2 may not
work with SCO ARCserve/Open Release 2.1.0. A tape drive that works
with SCO ARCserve/Open Release 2.1.0 may not work with SCO OpenServer
5.0.0 or 5.0.2. What is the reason for this behavior? Cause
SCO certifies tape devices that work with SCO operating systems using the standard SCO tape drivers including the Stp (SCSI) driver.
Cheyenne Corporation certifies SCSI tape devices that work with ARCserve/Open using the chey tape driver.
Because of the differences between the drivers, there is no guarantee that a tape device certified for use with SCO operating systems will work when used with ARCserve/Open.
Solution
Check the Hardware Compatibility Handbook (HCH) to confirm which
devices have been certified on which product. This document is
available on SCO's web site. Since the supported devices list is
constantly updated by SCO and Cheyenne, the online documentation
is the best source of information on tested and certified devices.Using a browser that supports tables, connect to the following URL:
http://www.sco.com/chwpA complete list of all tested and certified tape devices for SCO operating systems can be obtained by selecting Tape Devices from the Product Category list.
A complete list of all tested and certified tape devices for SCO ARCserve/Open can be obtained by selecting SCO ARCserve/Open Tape Drives from the Product Category list.