Technical article 105002

Attempts to mirror root or swap fail with the error, "Cannot determine the physical device vdisk15 resides on."

OpenServer 5.0.0

Written · Last revised

Problem

After choosing the boot option from the Virtual Disk Manager Menu bar, choosing either 'Mirror Root...' or 'Mirror Swap...' causes this error message to occur:

Cannot determine the physical device vdisk15 resides on
The operation is terminated.

Cause

This error occurs when the LANG variable is set to any 8859 based value.

Solution

If the LANG variable is unset before loading scoadmin(ADM), the operation can be completed normally.

This has been reported to SCO Engineering.

From the Xinuos technical article database, record 105002. Reproduced with permission. The original is at www.sco.com/ta/105002, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.