Technical article 107613

bootp will fail if the hardware (MAC) address is changed on OpenServer 5.

OpenServer 5.0.0

Written · Last revised

Problem

When you modify the hardware address in the bootptab, bootpd tries
to add the new hardware address to the system's arp table.  Since
there is already an arp entry for the host, bootpd hangs (or loops
a few times before failing) while trying to set the hardware address.

This was not seen in earlier versions of SCO UNIX System V/386.

Cause

The arp table is managed in a different way on SCO OpenServer 5.0 than it was in earlier revisions. Adding a new entry will no longer automatically overwrite an existing one.

Solution

To work around this problem, remove the original arp entry with the command "arp -d hostname" before making the change.

This problem has been reported to SCO Engineering.

From the Xinuos technical article database, record 107613. Reproduced with permission. The original is at www.sco.com/ta/107613, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.