Technical article 111048

Can I assign a pseudo tty port to a specific terminal or PC for users to telnet or rlogin to?

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5

Written · Last revised

Problem

Can I assign a pseudo tty port to a specific terminal or PC so that users can telnet or log in to a specific assigned port?

Solution

It is not possible to assign a specific pseudo port for a user to
telnet or rlogin to.  When you make a telnet connection, it telnets
to the next available lowest-numbered pseudo port that is not already
in use.
NOTE:     To determine what terminal you are on, use the tty command.

See also

Manual page: tty(C)

From the Xinuos technical article database, record 111048. Reproduced with permission. The original is at www.sco.com/ta/111048, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.