Problem
A section in the /etc/tcp file says to start irdd (IRD) completely commented out, stating that you must NOT run irdd with gated or routed:
# Do NOT run irdd with either gated or routed
# if [ -x /etc/irdd -a -f /etc/irdd.conf ]; then
# /etc/irdd &
# echo "irdd \c"
# fiYet, in Chapter 11 of the Networking Guide, in the section entitled "Configuring a system for IP routing", the second paragraph states:
"For a nonrouting host, typically use the IRD protocol and/or the RIP protocol. For a router, typically use the IRD protocol and at least one internal routing protocol (RIP or OSPF)."
Can I use IRD in conjunction with RIP or OSPF?
Solution
If both ipforwarding and ipsendredirects are set via inconfig, then irdd and any routing protocols run as a _router_ (for example, routed requests and replies to RIP). Otherwise they assume that the system is a _host_; for example, routed would remain passive, listening to RIP only.
Running irdd on a _host_ with any routing daemon is a bad idea. The routing daemon and irdd would compete to add and delete routes.
Running irdd on a _router_ with a routing daemon should work. irdd (on a router) advertises the router and replies to router solicitation requests, leaving the kernel routing table unmodified.
In this context, the comment in /etc/tcp is trying to avoid running irdd with any routing protocol on a _host_.
The documentation line that states:"For a nonrouting host, typically use the IRD protocol and/or the RIP protocol"
should instead state:"For a nonrouting host, typically use the IRD protocol or the RIP protocol"
This documentation error has been reported to SCO Engineering and is scheduled to be fixed in a future release of OpenServer 5.