Technical article 104796

Can I use a Compaq SmartStart Serial Number to Upgrade to SCO OpenServer Release 5.0?

OpenServer 5.0.0

Written · Last revised

Problem

My current system has been installed using the Compaq SmartStart
Utility.  I also installed user license packs from Compaq.  Now,
I want to upgrade to SCO OpenServer Release 5.0 as shipped from
SCO. Can I use the old SmartStart serial number and activation
keys in conjunction with my SCO OpenServer Release 5 Upgrade
Certificate of License and Authenticity?

Solution

Upgrades to SCO OpenServer Release 5.0 can be installed as:

1) A Fresh Installation
2) An Upgrade Installation

This step is selected at installation time from within the Installation Query Manager (IQM).

If you want to upgrade a Compaq SmartStart Machine to SCO OpenServer Release 5.0, you must select the Fresh Installation option as the Upgrade Installation option is not supported.

You must also ensure that the SCO OpenServer Release 5.0 Upgrade
product matches the Compaq SmartStart product that was previously
installed on the system.  For example, if you currently have a
Compaq SmartStart Enterprise 16-User product, you can only apply
an SCO OpenServer Enterprise Upgrade to this system.
NOTE:     There is one exception to this rule.  The Compaq SmartStart
          OSNET 16-User Serial Number and Activation Key are not
          recognized correctly by the IQM.  Please call your Compaq
          Support Center for a replacement Serial Number and Activation
          Key if you find that your OSNET 16-Serial Number and Activation
          Key are not being accepted by the IQM.

This document outlines the procedure that you must follow in order to use the Compaq SmartStart Operating System and License Pack serial number and activation keys to do a fresh installation of an SCO OpenServer Release 5 product.

CONSIDERATIONS:

Before installing any new system software, always back up your current system and verify that the backup was successful.

Create and test your emergency root and boot disks.

Verify that all non-SCO applications and drivers have been tested under OpenServer Release 5.

Read the SCO OpenServer Release Notes to make sure you have met all requirements.

You need to have a copy of the Compaq EFS 5.0 disks. (See TA104782, "How can I obtain the Compaq Extended Feature Supplement (EFS) 5.0?")

NOTE:     Any Compaq EFS prior to 5.0 will not work under SCO OpenServer
          Release 5.
INSTALLATION:

The following is an example of installing SCO OpenServer Release 5 using the Compaq SmartStart Serial Number and Activation Keys.

In this example, the user installed SCO Open Server Enterprise System Release 3.0 via SmartStart (16-user License), and subsequently added a 16-User to 1024-User License Pack. The user has purchased an SCO OpenServer Enterprise System Release 5, 1024-User License Upgrade from a 1024-User or more Network/Enterprise 3.0 System.

If you are using a Compaq machine with SCSI controller that requires a boot time loadable driver (BTLD), you need to link it at boot time.

The are two Compaq BTLD's supplied with Compaq EFS 5.02 for SCO OpenServer Release 5.0:

CUCHA=32-bit Fast & Wide SCSI controller - This controller is used on all of the current Compaq Servers, including the Proliant, and Prosignia family.

CUCCS=Compaq Options Port - This controller is ONLY used on the Compaq Systempro XL server.

For example, if you want to use the CUCHA BTLD, boot your system with the OpenServer Release 5.0.0 Boot Disk and type the following at the Boot: prompt:

restart link=CUCHA

The installation will continue reading the Boot Disk and will eventually prompt you to insert the disk with the CUCHA BTLD.

When prompted for the serial number and activation key, use the SCO OpenServer Release 5 upgrade license number and license code:

"Type in the license number and license code exactly as they appear on your Certificate of License and Authenticity."

LICENSE NUMBER:    2SP123456
LICENSE CODE:      typecode
LICENSE DATA:      k;o8.1;u1024;mfdk45n

SCO OpenServer Release 5 will recognize this as an upgrade license and ask for additional information:

"Type in your previous system's serial number and activation key exactly as they appear on the original Serialization card."

Serial Number:     004563423       Provided by Compaq
Activation Key:    cdertsu         (SCO Open Server
                                     Enterprise 16-user)

SCO OpenServer Release 5 will ask for license pack information:

"Type in your previous system's license pack and activation key."

Serial Number:     004563423       Provided by Compaq
Activation Key:    jlseuwl         (SCO 16-user to 1024
                                     user License Pack)

If you have entered the information correctly, the installation will proceed.

If you upgraded your user license from 16-user base to 1024
using more than one license pack, in other words, you upgraded
from 16 users to 128 and then upgraded from 128 to 1024, you
will only need to use the last license pack's serial number and
activation key.  In this case, you would use the 128-User to
1024-user license pack.

Once you have finished the installation, install:

SCO OpenServer Release Supplement Disk (VERY IMPORTANT); Compaq Extended Feature Supplement 5.02

From the Xinuos technical article database, record 104796. Reproduced with permission. The original is at www.sco.com/ta/104796, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.