Technical article 127730

Can my 507v3 virtual machine on VMware be modified to use the E1000 vNIC?

OpenServer 5.0.7

Written · Last revised

Problem

OpenServer 5.0.7V is pre-configured for the flexible vNIC using the
(pnt) driver.  I would like to update to the faster E1000 vNIC.

Cause

507v was configured as Virtual Machine Hardware Type 4 for
backwards compatibility for older versions of VMWare.  VM
Hardware Type 4 only supports the flexible vNIC which
emulates an AMD PC-NET NIC and uses the pnt driver.  The
flexible vNIC is limited to 10Mbps.

You can use the vSphere Client to check your VM Version, which is listed on the summary tab for your virtual machine.

Solution

If you are running ESX(i) 4.1 or higher, then you can upgrade your VM Hardware to Type 7 or higher which supports the E1000 vNIC.

It is recommended that you have a current backup of your Virtual Machine before changing the hardware type.

See also

TA127410 , "How can I make a full system backup for emergency recovery purposes of a SCO OpenServer 5.0.7V VM running on VMware ESX/ESXi?"

TA127437 , How can I create a backup of my OSR507V installation?"

VMware KB: "Choosing a network adapter for your virtual machine" http://kb.vmware.com/kb/1001805

From the Xinuos technical article database, record 127730. Reproduced with permission. The original is at www.sco.com/ta/127730, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.