Technical article 105213

Can't install OpenServer 5 on a Digital Prioris with 2 Adaptec 2940 controllers.

OpenServer 5.0.0

Written · Last revised

Problem

I have a Digital Prioris with two Adaptec 2940 PCI SCSI controllers.
One controller drives the hard disks, and the other supports a
Toshiba CD-ROM and a tape drive.  I can install SCO OpenServer 5
if I move the CD-ROM to the first controller, but not if the CD-ROM
is on the second controller.

Cause

The SCO OpenServer 5 installation kernel has a stripped-down
link kit, and only provides a single entry for each SCSI host
adapter.  This means that only one SCSI host adapter of a
particular type can be used for the installation. This is why
you can install with both hard disk and CD-ROM on the same 2940
but _not_ on separate ones.

Solution

To work around this problem, use two SCSI controllers that use different drivers (for example, you can mix spad and alad drivers and define a bootstring for the installation), or reconfigure the peripherals so that the ones necessary for installation (.e.g, root hard disk and CD-ROM) are connected to the same controller.

This problem has been reported to SCO Engineering.

From the Xinuos technical article database, record 105213. Reproduced with permission. The original is at www.sco.com/ta/105213, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.