Technical article 109245

Certain books fail to open under OpenServer 5.0.4 Help and I get a "seminit" error in the /etc/rc2.d/messages/S90atlas.log file.

OpenServer 5.0.4

Written · Last revised

Problem

When I try to access these books under the "Help" icon:

SCO OpenServer Features and Limitations, SCO OpenServer Handbook, Performance Guide

the following error message appears:

500 Server Error The server encountered an internal error and was unable to complete your request.

All other books open without problems.

Along with the above error, the following is logged to the /etc/rc2.d/messages/S90atlas.log file:

seminit failed (libsec code -8187)

Cause

One possible cause is that the permissions on the /tmp directory
are incorrect. The permissions for the /tmp directory should be
"drwxrwxrwt".  To check the permissions, type:
l -d /tmp  <enter>

Solution

To set /tmp to the proper permissions, type:

chmod 1777 /tmp  <Enter>
NOTES:    There may be other reasons for the above errors.  If it is not
          a permissions problem, run a software verify to check software
          integrity.

See also

man chmod(C)

From the Xinuos technical article database, record 109245. Reproduced with permission. The original is at www.sco.com/ta/109245, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.