Technical article 104780

Choose Olivetti EVC for video adapter during IQM, installation fails

OpenServer 5.0.0

Written · Last revised

Problem

If I choose 'Olivetti EVC' as the Video Adapter type during initial system load, these error messages are displayed and the installation must be restarted:

Fatal error in list.c,  line 566
Function SetListValue : illegal value
NOTICE: ram: No space on device on device 31/50
NOTICE: ram: No space on device on device 31/50
NOTICE: ram: No space on device on device 31/50
NOTICE: ram: No space on device on device 31/50
NOTICE: ram: No space on device on device 31/50
 /ramFS/instdir/iqm/iqm terminated by signal 6
** Safe to Power Off **
       - or -
** Press Any Key to Reboot **

Solution

During installation, choose 'IBM VGA' for the video type.
After the machine has been successfully installed, run the
Video Configuration Manager (accessed through the System
Administration folder) to change the video adapter type to
Olivetti EVC.  This operation should now succeed without error.

From the Xinuos technical article database, record 104780. Reproduced with permission. The original is at www.sco.com/ta/104780, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.