Technical article 109773

Compaq system displays "CPU2 cha: scsi bus reset" message on boot when SMP is licensed on the system.

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5

Written · Last revised

Problem

With SMP licensed on my system, when I try to boot I get the message:

CPU2 cha: scsi bus reset. attached scsi peripherals will return to power up state.

Cause

This has been reported to Compaq. The problem is in error-reporting only. The devices on the cha controller should be accessible despite the message.

Solution

Compaq has offered the following as a workaround to eliminate the messages:

1. cd  /etc/conf/pack.d/cha
2. vi  space.c
3. Search for "int cha_print_warnings= -1;"
4. Change it to "int cha_print_warnings=0;"

5. Relink the kernel and reboot for the change to take effect

From the Xinuos technical article database, record 109773. Reproduced with permission. The original is at www.sco.com/ta/109773, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.