Technical article 105639

Configure outgoing Morning Star PPP link for "No Link Security", pppd process gives "unknown option" error and fails to start.

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5

Written · Last revised

Problem

After configuring SCO PPP from Morning Star for an outgoing connection with no link security (no PAP or CHAP authentication), I restart pppd with the command "/usr/lib/mstppp/Autostart" and get an error about unknown options.

Cause

The options "nopap" and "nochap" are incorrectly added to the file /usr/lib/mstppp/Autostart for the outgoing link.

Solution

These options are not valid PAP/CHAP directives for Morning Star
PPP.  Manually edit the Autostart file and remove the "nopap" and
"nochap" entries, then re-run the "/usr/lib/mstppp/Autostart"
command to start the pppd process.

This has been reported to SCO Engineering and is scheduled to be addressed in a future release of SCO OpenServer 5.

See also

pppd(MST_PPP), ppp.auth(MST_PPP) manual pages, other articles in this database on PPP configuration and troubleshooting.

From the Xinuos technical article database, record 105639. Reproduced with permission. The original is at www.sco.com/ta/105639, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.