Technical article 113702

'cpio' fails to work when running the system off boot/root floppies on OpenServer 5.0.6 with rs506a installed

OpenServer 5.0.6

Written · Last revised

Problem

With rs506a installed on your system, booting the system up from boot/root floppies on Openserver 5.0.6, cpio fails to work. It will fail with:

dynamic linker : cpio : error opening /usr/lib/libsocket.so.2 Killed

NOTES:    This problem only arises with rs506a installed, this is important
	  for the two libraries needed are not on the base install of OpenServer
	  5.0.6.

Cause

The following two libraries have not been put on the root floppy when mkdev fd is run:

/usr/lib/libsocket.so.2
/usr/lib/libresolv.so.1

Solution

This problem has been submitted to SCO engineering.

A workaround, for now, is to put these two libraries on the root floppy disk.

1. When creating the root floppy, you will be asked if you wish to put additional files on the disk. Enter "y" and type in the two libraries:

# mkdev fd

2. Choose option 2: 'create emergency boot and root floppies.' 3. Choose the appropriate floppy type. 4. Choose to create the Root floppy. 5. Enter "y" when prompted with the following:

'Do you want to place extra files on the root filesystem? (y/n)'

You will now need to copy the two libraries to /mnt where the RAM disk image will be built later:

<bootroot> cp /usr/lib/libsocket.so.2 /mnt/usr/lib/libsocket.so.2
<bootroot> cp /usr/lib/libresolv.so.1 /mnt/usr/lib/libresolv.so.1

Now finish creating the root floppy disk and cpio will work after booting off the emergency floppies.

From the Xinuos technical article database, record 113702. Reproduced with permission. The original is at www.sco.com/ta/113702, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.