Technical article 109584

Digital FDDI adapter hangs under load in an SMP system.

OpenServer 5.0.4OpenServer 5.0.5

Written · Last revised

Problem

SCO OpenServer 5.0.4 SMP systems using the built-in dfx driver with Digital DEFPA DA or DB FDDI PCI Network Adapters can, under load, hang until the system is rebooted. Fifteen client telnet connections to the OpenServer system, each generating continuous screen output for 2-3 hours, is typically a sufficient load to cause the hang.

The following messages are also written to /usr/adm/syslog:

WARNING: dfx0 Controller has transitioned to halted state ! WARNING: dfx0 Halt ID: Adapter DMA error WARNING: dfx0 Resetting adapter WARNING: dfx0 DMA Command request failed Status=00000002 WARNING: dfx0 Adapter reset failed

Solution

This has been reported to SCO Engineering.

From the Xinuos technical article database, record 109584. Reproduced with permission. The original is at www.sco.com/ta/109584, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.