Technical article 109410

During installation of OpenServer 5.0.4 with a RAID controller, IQM shows a phantom drive (DISK4) and the install fails.

OpenServer 5.0.4

Written · Last revised

Problem

RAID with system (root) disk shows a phantom drive (DISK4) during
the SCO OpenServer Release 5.0.4 installation. The installation
fails when the phantom drive, DISK4, is configured during the
custom installation.

Cause

SCO OpenServer 5.0.4 has added SCSI-bus scanning features that did not exist in previous releases and which are causing installation problems with RAID root subsystems. OpenServer's Installation Query Manager (IQM) scans the SCSI Bus for SCSI drives during the installation process. OpenServer IQM detects a RAID logical drive, and also the physical SCSI drives on the RAID SCSI bus. The IQM is misinterpreting the RAID configuration. The IQM sees a RAID logical drive and a phantom drive, DISK4, which does not exist. The problem is scheduled to be corrected in a future release of SCO OpenServer 5.

Solution

There are three ways to work around this problem:

1. Add "scsi.noscan" to the boot string. For example:

defbootstr link="amird" Sdsk=amird(0,0,0,0) Srom=alad(0,0,5,0) scsi.noscan

2. Use the entire disk for UNIX during installation.

3. Skip Disk4 when selecting custom divvy/fdisk installation.

From the Xinuos technical article database, record 109410. Reproduced with permission. The original is at www.sco.com/ta/109410, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.