Problem
I want to switch from MMDF to sendmail(ADMN) without disabling
MMDF first. I try to enable sendmail(ADMN) while MMDF is
still enabled using the custom(ADM) command:# custom -p SCO:odtes -e SCO:SendMail
Executing cqs script ./opt/K/SCO/SendMail/8.6.8g/cntl/cqsEnable complete
#The message 'Enable complete' implies that sendmail(ADMN) has been successfully enabled but this is not the case. MMDF is still configured and running correctly and no sendmail(ADMN) files have been enabled.
I then disable MMDF with "custom -p SCO:odtes -d SCO:MMDF" which is
successful. However, when another attempt is made to enable
sendmail(ADMN) an error is returned and sendmail(ADMN) is still
not enabled:# custom -p SCO:odtes -e SCO:SendMail
Executing cqs script ./opt/K/SCO/SendMail/8.6.8g/cntl/cqsEnter the full hostname to use for mail [abc.sco.com]:
*** Initializing configuration files for SCO SendMail (ver 8.6.8g)
Error:
Error while executing an enable phaseError Stack: Attach phase for "SCO:SendMail" failed Error attaching component SCO:SendMail::8.6.8g to client SCO_SV Error attaching control package for SCO:SendMail Client control package has not been successfully loaded
Enable complete
# Cause
MMDF must first be disabled before attempting to enable
sendmail(ADMN). However attempting to enable both MTA's at the
same time should not cause these errors. SCO is aware of
this problem and is working to resolve it. Solution
The SendMail package needs to be reinstalled from either distribution media or from another machine on the network. Once sendmail(ADMN) is reloaded onto the machine it can then be enabled successfully.
The problem is with the sequence of events. If MMDF is first disabled (before any attempt is made to enable sendmail(ADMN)), and then sendmail(ADMN) is enabled, no errors should occur and sendmail(ADMN) should be enabled successfully on the first attempt.