Technical article 111861

"Error 5 has occurred. Access is denied." when running "net view \\systemname" with AFPS 4.0.2 to check shared resources on a Windows 98 client system.

OpenServer 5.0.6

Written · Last revised

Problem

I installed AFPS 4.0.2, which came with my SCO OpenServer Enterprise 5.0.6 media kit. After configuring AFPS I run the "net view" command and it does display the servers which are announcing themselves. Then I run the following command to check shared resources on a Windows 98 client system that I have configured to share resources:

# net view \\systemname

Where "systemname" is the node name of the client.

That command produces the following error message:

Error 5 has occurred.
Access is denied.

If I remove AFPS 4.0.2 and install AFPS 3.5.2, the command works properly.

Solution

This has been reported to SCO Engineering.

From the Xinuos technical article database, record 111861. Reproduced with permission. The original is at www.sco.com/ta/111861, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.