Problem
SCO OpenServer Release 5.0.0 and 5.0.2 offers support for DOS Filesystems (DOS/Windows Partitions) configurable through the Filesystem Manager. Enabling the mount at boot time will add an entry to /etc/default/filesys similar to:
bdev=/dev/dsk/0sC \
mountdir=/u/rainerf/w95 mount=no fstyp=DOS \
fsck=dirty rcmount=yes rcfsck=dirty \
mntopts="lower,rw"Upgrading an SCO OpenServer 5.0.0 or 5.0.2 system that has DOS support configured in the above way, to SCO OpenServer 5.0.4 using the Intelligent In-place Upgrade feature, causes the following error upon the reboot:
/dev/dsk/0sC
mount: invalid filesystem type DOS
Phase 1: - Syncing up FATS
Phase 2: - Checking directories
Bad directory entry 'AP.' delete y/n ?Choosing 'n' will return you to the same question. In fact, fsck is stuck in an infinite loop.
Cause
The DOS Filesystem Support is not automatically configured by the in-place upgrade.
Solution
If you are mounting your DOS/Windows partition during system startup and would like to upgrade your system, you can either delete all DOS partition/filesystem entries from /etc/default/filesys and then re-create your DOS mount entries after the upgrade, or back up your current /etc/default/filesystem by:
#copy -om /etc/default/filesystem /etc/filesys/filesys.dosPerform the upgrade and configure your DOS Filesystem Support, and then relink and reboot.
Restore your backup /etc/default/filesystem.dos.NOTE: Once you are in the fsck loop you will need to switch off (reset)
your machine, bring it back to single-user mode, and delete the
entries in /etc/default/filesys.