Technical article 104973

"/etc/fontserv start" returns "TCP/IP must be running before starting the font server".

OpenServer 5.0.0

Written · Last revised

Problem

When I run:
# fontserv start
I get the error message:

TCP/IP must be running before starting the font server.

Solution

The chapter "Error messages when running /etc/fontserv" in the SCO Advanced Hardware Supplement (AHS) 5.1.0 Release Notes outlines this solution:

If you run /etc/fontserv start, it may incorrectly produce this error message:

TCP/IP must be running before starting the font server.

For the font server to run, you must modify the /etc/fontserv command.

Enter the following commands as root:
# cp  /etc/fontserv  /etc/fontserv.bak
# sed '/slink/,/fi/d'  /etc/fontserv > /tmp/fontserv
# cat /tmp/fontserv > /etc/fontserv

Once this is done, start the font server:

# /etc/fontserv  start

If you need to restore the old version of fontserv, enter this command as root:

# cat  /etc/fontserv.bak > /etc/fontserv

From the Xinuos technical article database, record 104973. Reproduced with permission. The original is at www.sco.com/ta/104973, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.