Technical article 107628

"Failed to open stack configuration file /etc/pppstack, will use defaults."

OpenServer 5.0.0OpenServer 5.0.2

Written · Last revised

Problem

I notice the following error in the /usr/adm/syslog file:

pppd[9563]: ppp_rdstack_cnf: failed to open stack configuration file /etc/pppstack, will use defaults

Should I be concerned about this error, and what does it mean?

Cause

The /etc/pppstack file contains driver and module information for
non-SCO smart asynchronous serial port devices.  Each entry in
the file contains the absolute pathname of the device, the name
 of the device driver and the name(s) of the corresponding modules.
 If the /etc/pppstack file does not exist, the PPP daemon (see
pppd(ADMN)) configures the default PPP stack.

Solution

This is a courtesy message, and can safely be ignored.

NOTE:     For more details, see the pppstack(SFF) manual page.

From the Xinuos technical article database, record 107628. Reproduced with permission. The original is at www.sco.com/ta/107628, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.