Technical article 105528

First use of SCSI jukebox device fails with Power-on or Bus reset errors.

OpenServer 5.0.2

Written · Last revised

Problem

After booting a system with a SCSI jukebox device (using the Sjk driver) configured, I get messages such as:

Power-on Reset, or Bus Reset on SCSI Juke 0 dev 101/0 (ha=1 id=4 lun=0)

upon first attempted access of the device.

Solution

This problem has been resolved in SCO OpenServer Release 5.0.4. For the releases listed above, subsequent attempts to access the device should be successful.

From the Xinuos technical article database, record 105528. Reproduced with permission. The original is at www.sco.com/ta/105528, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.