Technical article 104309

Getting a message similar to "mailbox is locked" and cannot read mail.

OpenServer 5.0.0OpenServer 5.0.2

Written · Last revised

Problem

I am getting an error message along the lines of "mailbox is locked, mail box in use or mail: Cannot read lock file '/usr/spool/mail/username'". The message is coming from the mailreader so the message will vary depending on the mailreader you are using. The common symptom however, is that the user is unable to read mail.

Solution

Check the file /usr/mmdf/mmdftailor and look for the line:

MLCKTYPE advisory

1. If the line is not there, add it.

2. Remove any other references to MLCKTYPE*
(* = anything following MLCKTYPE)

If this change fails to resolve the problem and you are using a SCO supplied mailreader, contact SCO Support.

From the Xinuos technical article database, record 104309. Reproduced with permission. The original is at www.sco.com/ta/104309, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.