Technical article 105146

Getting error "system log: cannot open internet domain socket address already in use" and/or "cpd bind address already in use".

OpenServer 5.0.0

Written · Last revised

Problem

When attempting to boot my system into multiuser mode, I get the following error messages:

"system log: cannot open internet domain socket address already in use"

and/or
"cpd bind address already in use"

Solution

Ordinarily, this message would be a signal to the user that there is more than one machine on the same network segment that has the same IP address. However, it has been found that this message will also be generated when there are duplicate instances of ifor_pmd daemon being invoked.

Check the /etc/inittab file to ensure that there is only one occurrence of the ifor_pmd line. The line should look like this:

ifor::sysinit:/etc/ifor_pmd </dev/null >/usr/adm/pmd.log 2>&1

If there is a duplicate line, remove it.

Also be sure to check /etc/conf/init.d/sio for an occurrence of ifor_pmd as well. There should not be an ifor_pmd in this file. Ordinarily, the /etc/conf/init.d/sio file will contain this:

Se1a:234:off:/etc/getty tty1a m
Se1A:234:off:/etc/getty -t60 tty1A 3

There may be more lines than this if you have multiple COM ports or a serial multiport board installed.

From the Xinuos technical article database, record 105146. Reproduced with permission. The original is at www.sco.com/ta/105146, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.