Technical article 110611

Graphics sessions :6 and :7 fail to initialize properly.

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5

Written · Last revised

Problem

I am using many X console sessions on one PC and am unable to get more than 6 (:0-:5) operating properly. Using startx -- :0 (in csh) to startx -- :5 works properly; however, a startx -- :6 generates this message:

Trying display 6

/dev/X6R: No such file or directory Waiting for X Server to begin accepting connections

../dev/X6R: No such file or directory
Binding TCP socket: Address already in use

Fatal Server error Cannot establish TCP listening socket /dev/X6R: No such file or directory giving up

xinit: No such file or directory (errno 2): unable to connect to X Server.

Cause

X6 and X7 device nodes do not exist in the /dev directory.

Solution

This problem is fixed in SCO OpenServer Release 5.0.6.

As a workaround for earlier releases, follow these instructions:

mknod X6R c 60 242
mknod X6S c 60 243
mknod X7R c 60 240
mknod X7S c 60 241
chmod a+w X6*
chmod a+w X7*

From the Xinuos technical article database, record 110611. Reproduced with permission. The original is at www.sco.com/ta/110611, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.