Problem
Has the Compaq 5100 notebook computer been certified for use with SCO OpenServer Release 5.0.0?
Solution
The Compaq 5100 has passed certification as a supported platform for
SCO OpenServer Release 5.0.0 operating systems. You should be able
to install any version of SCO OpenServer 5 if you observe the
following during the installation:1. The floppy diskette drive must be installed on the laptop
and not on the docking station. If you have the diskette
drive on the docking station, the installation will fail
and the display will show "EEEEEEEEEEEEEEEEE" across the
whole screen.2. The video chipset for the laptop is Cirrus Logic GL-5434
and supports 800x600x256 at 60HZ. You should use Compaq
SVGA as the monitor type.3. The network adapter in the docking station is NE200Plus and uses the default settings of:
Base Address = 300
IRQ = 104. Since you must have the disk drive in the laptop, you
will need to put the CD-ROM into the docking station. Put
the CD-ROM into the left bay on the docking station. This
will make the CD-ROM the master device on the second IDE
adapter.Installations without the Advanced Hardware Supplement (AHS) 5.1 use this boot string:
boot: defbootstr ahslink=ATAPIInstallations with AHS 5.1 use this boot string:
boot: defbootstr ahslink=wdWhether you use AHS 5.1 or not, the following applies:
Adapter = 1 Device ID = 0 Bus = 0 LUN = 0
You should now be able to install SCO OpenServer 5 on the Compaq 5100 notebook.
NOTICE: SCO OpenServer Release 5 is the ONLY release of SCO operating systems for which this machine has been certified. Previous releases of SCO operating systems are not supported.