Technical article 107680

How can I configure sendmail to deliver mail through UUCP exclusively and not use SMTP at all?

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5OpenServer 5.0.6

Written · Last revised

Problem

I want to configure sendmail to deliver mail exclusively through UUCP and not use SMTP.

Solution

The following information assumes that you have Sendmail 8.8.5
(SLS OSS443A) or greater installed, but will work with Sendmail 8.7.x
or greater. If you are using a version of Sendmail prior to 8.7.x,
see Technical Article 107616, "How do I configure Sendmail to send
mail over UUCP and not SMTP?".  It is recommended that you use the
latest version of Sendmail available.  You must run "mkdev cf" after
installing Sendmail 8.8.5 if you want to generate a new sendmail.cf
file designed specifically to run with sendmail 8.8.5. If you do this,
any modifications you've made to your current sendmail.cf file will
be overwritten.
Please take the following steps:

1. Log in as root. 2. Using your favorite text editor, edit the file:

/usr/lib/sendmail.cf (in Unixware: /etc/sendmail.cf).
In this example, we will use the domain name "domain.com", and
the UUCP name "uucpname" for the local system name, and "remote"
for the remote UUCP system name.  You should replace these names
with those pertinent to your own configuration.

3. Enter the domain name in the section of the cf file that looks similar to the following:

##################
#   local info   #
##################
# Our local (e.g. LAN) domain name
DDdomain.com
4. Verify that the name of the host and the fully qualified domain
   name are correct for the Cw macro and the DU definition.  For our
   example, they will look similar to the following:
# all the names this host is known by
Cwuucpname.domain.com uucpname
# Our uucp name
DUuucpname
5. Verify that there is a DG definition and a CU macro for the remote
   system.  If they do not exist, add them below the DU entry you
   just made.  For our example, they will look similar to the
   following:
# the uucp gateway class to which we route uucp mail from leaf nodes
DGremote
# the list of uucp hosts that we speak to (same rules as Cw, use the
# output of the "uuname" command; also, when you add or delete a host
# from /usr/lib/uucp/Systems, don't forget to add or delete it here)
CUremote
FU/usr/lib/uucp/Systems %[^     \#]
6. We now need to configure ruleset 0 to send all mail out using UUCP
   as the mailer.  Searching for "S0" will bring you to ruleset 0.

- Look for the text string "# handle numeric address spec". - Edit the following line, changing the mailer from smtp to uucp-dom.

R$* < @ [ $+ ] > $*     $#smtp $@ [$2] $: $1 < @ [$2] > $3

The line should end up looking similar to the following:

# handle numeric address spec
R$* < @ [ $+ ] > $*     $: $>98 $1 < @ [ $2 ] > $3
R$* < @ [ $+ ] > $*     $#uucp-dom $@ [$2] $: $1 < @ [$2] > $3
7. Look for the text string "# deal with other remote names" and
   change the mailer from smtp to uucp-dom.  The line will initially
   look like this:
R$* < @$* > $*          $#smtp $@ $2 $: $1 < @ $2 > $3

And finally, look similar to the following:

R$* < @$* > $*          $#uucp-dom $@ $2 $: $1 < @ $2 > $3
8. Edit the UUCP mailer specification.  Search for the string
   "specification" until you find an entry that looks similar to
   the following:
#####################################
###   UUCP Mailer specification   ###
#####################################

We are primarily interested in the domain-ized UUCP mailer. Make the following changes to the domain-ized UUCP mailer:

Add the -D flag to rmail to allow the specification of a
non-standard transport domain.  The entry should look similar to
the following:
# domain-ized uucp mailer
Muucp-dom,      P=/usr/bin/uux, F=mDFMhu, S=52/31, R=21, M=100000,
A=uux - -r -a$f -gC $h!rmail -D ($u)
We must now hardcode the name of the remote UUCP system to the
rmail command.  The final entry should look similar to the
following:
Muucp-dom,      P=/usr/bin/uux, F=mDFMhu, S=52/31, R=21, M=100000,
A=uux - -r -a$f -gC remote!rmail -D domain.com ($u)
9. Finally, you must restart the sendmail daemon in order for these
   changes to take effect.  You can do this by typing the following
   at the command line:
kill `head -1 /etc/sendmail.pid`

See also

sendmail.cf(SFF); sendmail(ADMN); UUCP(C); rmail(ADMN)

From the Xinuos technical article database, record 107680. Reproduced with permission. The original is at www.sco.com/ta/107680, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.