Technical article 100052

How can I extract the NetBIOS driver from SLS OSS449A?

OpenServer 5.0.0OpenServer 5.0.2

Written · Last revised

Problem

I want to install the NetBIOS routing facility provided within the Support Level Supplement (SLS) OSS449A without installing the whole supplement on my operating system. How can I do this?

Solution

The NetBIOS Driver.o file may be extracted from the SLS media as follows:

Log in as the "root" user. Shutdown the server and reboot it in single-user mode. Follow these steps:

# cd /tmp
# cpio -idmuvc -I <media device or SLS image file>
# cd opt/K/SCO/tcp/OSS449A.tcp200.1/usr/lib/tcprt/ID/nb
# uncompress Driver.o.Z
# mv Driver.o /tmp/
# cd /tmp
# rm -r opt

The driver is then copied to the kernel link kit and the UNIX kernel relinked.

# cd /etc/conf/pack.d/nb
# mv Driver.o Driver.o.org
# mv /tmp/Driver.o .
# cd /etc/conf/cf.d
# ./link_unix
Reboot the server into multiuser mode.

NOTE: Since the "Driver.o" file has been manually replaced in the system, the custom(ADM) verify utility, if run, may complain regarding this file's checksum and size.

See also

IT tcpip/486, "What is the SLS OSS449F Network Maintenance Supplement?".

From the Xinuos technical article database, record 100052. Reproduced with permission. The original is at www.sco.com/ta/100052, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.