Technical article 104939

How can I mirror or stripe non-root filesystems using Virtual Disk Manager?

OpenServer 5.0.0

Written · Last revised

Problem

There is no menu option within the Virtual Disk Manager for
creating a mirror or stripe for my non-root filesystems.  Is
there a way to do this manually?

Solution

It is a straightforward procedure, but you must first back up your entire system, and verify the integrity of the backups. For more information on system backup and verification, see other articles in this database.

When the backups are done, make sure the system is in multiuser mode, unmount the filesystem(s) you want to convert to virtual disks, start Virtual Disk Manager, and do the following:

Disk ==> New ==> Vdisk type "Simple" ==> Allocate Piece

The Allocate Piece screen will present you with a list of available physical disk partitions configured on the system. Choose the disk that contains the filesystem you want to convert to a virtual disk (that is, /dev/dsk/0s1 for a filesystem on your primary (bootable) disk, /dev/dsk/1s1 for a filesystem on a secondary disk, and so on.).

When you select the disk, a table will appear that shows the
disk mapping, including the names and sizes of existing
filesystems.  You must be very careful at this point to select
the correct filesystem.
*** Make your selection carefully ***

If, for instance, you are trying to convert /u but the /root filesystem is highlighted, your root filesystem will be overwritten and your system will become unusable.

When you have double-checked that the correct filesystem is
highlighted, click "OK" and then "Create".  The existing filesystem
will be converted to a Simple virtual disk, your data will be
overwritten, and you will be prompted to create a filesystem.
Once the filesystem is in place, you can then create your mirror
or stripe using VDM.  See other articles in this database for
more information on configuring disk arrays in the Virtual Disk
Manager.  You can then mount the new filesystem and restore your
data from backups.

From the Xinuos technical article database, record 104939. Reproduced with permission. The original is at www.sco.com/ta/104939, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.