Technical article 100582

How can I turn ALL kernel messages off?

OpenServer 5.0.0

Written · Last revised

Problem

How can I tell the kernel not to display any error messages on the system console?

Solution

The following program shows how to do it.  Note that kernel messages
will still go to /usr/adm/messages, but not to the current
multiscreen.  This will affect any routine that calls cmn_err(K).

** Please note that you will need the Development System to compile this program**

---cut paste glue---
/* this program turns kernel messages on or off.  they still go to /dev/error
 * and hence to /usr/adm/messages via /etc/logger
 * Note that this is more powerful than the FLIOCPRT floppy ioctl which
 * just prevents floppy error messages from showing up on the screen -- this
 * blocks everything except panic messages.
 * I have another program which redirects all cmn_err messages from the
 * active multiscreen to a *specific* multiscreen by patching cnputchar().
 * Also take a look at Sdsk_verbosity in /etc/conf/pack.d/Sdsk/space.c
 *
 * this program requires read access on /unix and write access on /dev/kmem
 * Only works on Vers. 4.[012] and 5.0 - version 3.2.2 uses macros which you
 * can't patch.
 * - Nathan
 *
 * Compile: cc kernel.c         # for 3.2.4.x OS
 *          cc -DOSR5 kernel.c  # for 3.2.5.0 OS
 *
 */
#include         <stdio.h>
#include         <sys/types.h>
#include         <nlist.h>
#ifndef                  UNIX
#define                  UNIX                  "/unix"
#endif
#ifndef          KMEM
#define                  KMEM                  "/dev/kmem"
#endif
struct nlist nl[2];                  /* sym, NULL */
char* malloc();
char* calloc();
char* strcpy();

/* * turn kernel messages to screen "on" or "off" */ main(argc, argv) int argc; char *argv[]; { int i, fd, loop2; unsigned int val; int setval, doset = 0; char buf[100]; char ch;

if (argc == 1) { printf("This utility prevents kernel messages from going to the screen\n"); printf("They will still go to /dev/error (and hence /usr/adm/messages)\n"); printf("will work on 3.2.4.[012] and 3.2.5.0 OS -- will never work on "); printf("3.2.2OS\n"); printf("Usage: %s [off|on]\n",argv[0]); exit(1); }

if (strcmp(argv[1],"off") && strcmp(argv[1],"on")) {
     printf("Usage: %s [off|on]\n",argv[0]);
       exit(1);
}
    nl[0].n_name = "prfchar";
    nl[1].n_name = NULL;
    if (nlist(UNIX, nl) == -1)
         error(UNIX);
    if ((fd = open(KMEM, 2)) == -1)
         error(KMEM);
#ifdef OSR5
#define OFFSET 0x51
#else
#define OFFSET 0x43   /* offset into routine where if (prt_where & PRF_CONS) */
#endif
    lseek(fd, nl[0].n_value + OFFSET, 0);  /* NOT _prfchar */
    read(fd, &ch, 1);
    if ( (ch != 0x2) && (ch != 0x0)) {  /* feeble sanity check here */
         /* PRF_CONS=2 in prfchar in kernel os/prf.c:see <sys/cmn_err.h> */
       printf("wrong value (got 0x%x) should be 0x0 or 0x2\n",(int) ch);
       exit(1);
    }
    lseek(fd, nl[0].n_value + OFFSET, 0);
    ch= (strcmp(argv[1],"off") ? 0x2 : 0x0);/*can change to if (prt_where & 0)*/
    if (write(fd, &ch, 1) == -1) { error("write"); exit(1); }
    close(fd);
    exit(0);
    return(0);
}
error(s)
    char* s;
{
    perror(s);
    exit(1);
}
/* end of program */

From the Xinuos technical article database, record 100582. Reproduced with permission. The original is at www.sco.com/ta/100582, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.