Technical article 105025

How can I use the Software Manager/custom(ADM) with a non-standard device?

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4

Written · Last revised

Problem

I want to install some software from a non-standard tape or CD-ROM device using the Software Manager (custom(ADM)) but I cannot find a way to get the Software Manager to see my device.

Cause

The Software Manager (custom(ADM)) is only aware of devices that
are registered in the file /etc/conf/cf.d/sysRegistry.  It uses
a Device Query Interface (DQI) to query the sysRegistry file
for potential install devices.  Some non-SCO floppy drive, tape or
CD-ROM device drivers may not make use if the Registry and
therefor cannot be seen by custom(ADM).

Solution

To work around this problem, take these steps:

If you are installing from CD-ROM, link your character and block devices to /dev/rcd0 and /dev/cd0.

If you are installing from tape, link the tape rewind device to /dev/rct0, link the no-rewind device to /dev/nrct0, and link the tape control device to /dev/xct0.

Invoke the Software Manager/custom(ADM) and before you select the "Install New" option from the Software menu, move the following file aside to bypass the DQI:

/etc/conf/cf.d/sysRegistry

Once the installation is completed, move the above file back into place.

From the Xinuos technical article database, record 105025. Reproduced with permission. The original is at www.sco.com/ta/105025, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.