Technical article 109858

How do I configure additional logical drives that I configured through my Hardware RAID Configuration Utility?

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5

Written · Last revised

Problem

I don't know the SCSI ID and logical unit number (LUN) to configure my additional logical drives through "mkdev hd", after configuring these logical drives through the Hardware Raid Configuration Utility.

Solution

Additional logical drives will all be located at scsi id 0. The logical unit number will increase incrementally starting at 0 for the first logical drive. So, if you are adding a second logical drive, the LUN will be 1.

See also

Contact your hardware vendor for more information concerning your Hardware Raid Controller. You can contact:

Mylex at http://www.mylex.com
DPT   at http://www.dpt.com
AMI   at http://www.ami.com
HP    at http://www.hp.com

From the Xinuos technical article database, record 109858. Reproduced with permission. The original is at www.sco.com/ta/109858, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.