Technical article 102151

How do I configure SCO Merge for NetWare access?

OpenServer 5.0.0OpenServer 5.0.2

Written · Last revised

Problem

How can I configure my SCO Merge DOS users to access NetWare resources?

Solution

You will need to do the following to set up NetWare access for SCO Merge users:

First, you need to ensure that you have a correctly configured IPX/SPX over the network card that is connected to your NetWare network. See the "Configuring Network Connections" online documentation for details about how to configure IPX/SPX correctly.

Get a copy of either NETX.COM or NETX.EXE from a Novell NetWare client machine and copy it to floppy disk.

Run an SCO Merge session and copy the above file to the directory:

J:\SHARE

Use your favorite DOS editor (for example, edit) to add these lines to each users AUTOEXEC.BAT:

J:\MERGE\LCCIPX
J:\SHARE\NETX.EXE
or
J:\MERGE\LCCIPX
J:\SHARE\NETX.COM

Exit from the SCO Merge session and restart it.

You should then see a message saying that you have been connected to server <xxxxxx> where "<xxxxxx>" is the name of a NetWare server on your network.

The O: drive of your DOS session should now contain all the NetWare utilities necessary to allow you to log in to and use the NetWare server.

From the Xinuos technical article database, record 102151. Reproduced with permission. The original is at www.sco.com/ta/102151, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.