Technical article 109248

How do I disable or enable the Compaq Wellness Driver (cpqw)?

OpenServer 5.0.4OpenServer 5.0.5OpenServer 5.0.6OpenServer 5.0.7

Written · Last revised

Problem

How do I disable or enable the Compaq Wellness Driver on my server?

Solution

As root, invoke 'mkdev cpqhealth' and you will see:

Compaq Wellness Installation
Please select (i)nstall, (d)elete, or (q)uit:

Choose the option you want and press <Enter>.

You will be prompted to relink the kernel.  After relinking,
reboot the server.

During the subsequent reboot, depending on your response above, you either should or should not see the following in the hardware boot messages:

cpqw               -         -   -   Compaq Wellness driver (ver 5.18a)
crom               -         -   -   Compaq rom driver (rev 2.0)

See also

TA109249, "How do I print the Compaq server health logs for my HP (Compaq) server?"

TA118120, "What is the latest Compaq EFS available for OpenServer 5.0.x?"

TA125587, "My kernel relink fails when I try to install the 5.48
          version (or previous) of the HP (Compaq) EFS on
          OpenServer 5.0.7"

From the Xinuos technical article database, record 109248. Reproduced with permission. The original is at www.sco.com/ta/109248, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.