Problem
How do I display the device type, vendor ID, Product ID, Firmware version, SCSI type and whether or not compression is set for an ARCserve tape device?
How do I display the tape name, tape ID, Media type, write protection, Format Code, tape density, last format date, first format date, expiration date of tape, number of times a tape has been formatted, number of times a tape has been used, KB written to the tape, number of minutes and hours that a tape has been used, the number of write and read passes, software write and read errors and number of media and unrecoverable errors?
-- or --The Device Management Window displays show that the tape type
is "DC6000" when the tape media density is 150MB, 250MB, 525MB
or 1GB. How do I display ARCserve information about an individual
tape? Solution
Open the SCO ARCserve/Open icon in the System Administration
folder on the main desktop and click on the Device Management
button. Once the Device Management window is open, use the
menu at top of that window to open Device Management --> device
info, or Device Management --> tape info, or use the right mouse
button and click on either the Device Info or Tape Info window.NOTE: If Device Info "density code" or Tape Info "density" shows a size
that is not what the tape is physically labeled for by the
manufacturer, then either the tape is worn or stretched, or the
tape device is misaligned. ARCserve queries the tape device for
information about the tape. That information is passed back to
ARCserve. If the tape device is unable to read the tape properly,
then the results read will reflect that. If the tape device is a
1GB device and a 1GB tape is used, "density code" and "density"
will be shown as "default", not 1GB. This is normal. See also
SCO ARCserve/Open from Cheyenne User Guide.