Problem
I have received an SCO OpenServer Support Level Supplement (SLS) on hardcopy diskette, but the only installation instructions I have are for downloaded images.
How do I install an SCO OpenServer SLS from floppy disk?
Solution
Most SCO OpenServer Support Level Supplements (SLSs) are available as downloaded media images. The installation instructions that accompany these SLSs will most likely refer to the downloaded media image rather than hardcopy diskette.
The following instructions should be used when installing an SCO OpenServer SLS from floppy media:
1. Log in as root and run the Software Manager with the command:#scoadmin software2. Insert the diskette that contains the VOL.000.000 image of the
SLS, or the disk labeled "Volume 1."3a. For SCO OpenServer 5.0.0 and 5.0.2 systems, pull down the "Software" menu and select "Patch Management -> Apply Patch". You will see the "Begin Apply Patch" menu. Be sure the local machine name is selected and choose "Continue".
- OR -3b. For SCO OpenServer 5.0.4 and 5.0.5 systems, pull down the "Software" menu and select "Install New". Be sure the local machine name is selected and choose "Continue".
4. In the "Select Media" window, pull down the "Media Device"
menu. Select the appropriate floppy disk drive and then
"Continue".5. Next, you will be prompted as to whether you wish to do a full
or partial installation of the SLS. Choose "Full".6. Insert any other volumes of the SLS when prompted.7. Once the installation finishes, select "Exit" from the "Host"
menu. Installation of the SLS is now complete.8. Check the cover letter that accompanies the SLS for any further
instructions, including whether or not a system reboot is
necessary.