Problem
How do I install OpenServer Release 5.0.0 with my hard drive on one SCSI host adapter and my CDROM or tape drive on a second SCSI host adapter?
Solution
A bootstring will need to be specified for the second host
adapter. You will need to know:adapter I/O address
interrupt
dma channel
SCSI IDBoot with the N0 disk and get to the boot prompt. You will use
a bootstring similar to this one:restart adapter=ad(0x230,12,6) Srom=ad(0,5,0)
| | | | | | | |
Driver name_| | | |_DMA | | | |_LUN
| | | | |
Base Address____| |_IRQ | | |__SCSI ID
| |
Driver name_____| |__Host Adapter NumberThis bootstring says that there is a SCSI host adapter using
the 'ad' driver, at adapter I/O address 0x230, with an interrupt
of 12, and a DMA channel of 6. If the host adapter doesn't use
a DMA channel, use 0. The second part says that the CDROM is
attached to the SCSI host adapter using the 'ad' driver, at host
adapter number 0, SCSI ID 5, and LUN 0.If you were using a SCSI tape drive attached to the second SCSI host adapter, Srom will need to be changed to Stp:
Boot
: restart adapter=ad(0x230,12,6) Stp=ad(0,2,0) See also
For more information on bootstrings see the section titled "Using bootstrings" in the SCO OpenServer Handbook.