Technical article 109326

How do I switch off the logging facility in the SCO OpenServer 5 Popper Daemon?

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5

Written · Last revised

Problem

Every time a POP client accesses my POP server, a message is logged
into /usr/adm/syslog.  The popper documentation says that popper
uses the 'local0' facility for logging to syslog.

Cause

There is an error in the online 'popper(ADM)' man page.

Solution

This problem is fixed in SCO OpenServer Release 5.0.6.

Contrary to what the SCO OpenServer 5.0.5 man page states, the SCO version of popper uses the 'mail' syslogd facility instead.

For SCO OpenServer 5.0.5 (and earlier) the popper connection
messages can be disabled to modify the behavior of the syslogd
daemon.  To do this, follow these stepa:
1. Edit the file /etc/syslog.conf
2. Change the line that reads:
*.info,*.debug                                  /usr/adm/syslog
to:
*.info,*.debug;mail.none                        /usr/adm/syslog

Note that the white-space above MUST be tabs and not spaces.

3. Then run this command:
kill -1 `cat /etc/syslog.pid`

From the Xinuos technical article database, record 109326. Reproduced with permission. The original is at www.sco.com/ta/109326, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.