Problem
How do I use tls709, the IP Filter? Solution
Obtain the "tls709", IP Filter package, which is available from the following URL:
https://ftp.scoexpert.com/tlsTo install the package, follow the instructions detailed in:
https://ftp.scoexpert.com/TLS/tls709.ltrPlease note the following:a) The contents of the "tar" file are not absolute pathnames
b) The file "tls709" is "tls709.tar"
c) The reference for OSS449FNote: To install this package on OpenServer 5.0.4 or earlier, first install OSS449F. It is documented in the cover letter and Technical Article that rs504c supersedes oss449f and should be installed instead.
To install this package on OpenServer 5.0.2 or earlier, first install OSS449F.
To start to use the filter, enter the rules in the file:
/etc/ipf.rulesThe format of these rules are detailed at the following web site:
http://www.obfuscation.org/ipf/ipf-howto.txtFor example, to block the IP address 1.2.3.4 enter a rule such as:
block in from 1.2.3.4 to anyTo activate the rule, run the command:
/etc/ipf -Fa -f /etc/ipf.rulesNow 1.2.3.4 will be blocked.To view statistics, use the command:/etc/ipfstatNOTE:This TLS is unsupported and it is recommended that customers upgrade to OpenServer 5.0.6 which has a fully supported IP filter solution, with the "ipfilter" command.
See also
ta111071, "How to use SCO OpenServer 5 with DSL Internet access."
ta112041, "Getting started with Network Address Translation (NAT) on OpenServer 5."
The official IP Filter web site is located at the following URL:
http://coombs.anu.edu.au/~avalon/ip-filter.html