Problem
SCO Merge Release 3.2.x includes the DOS utility, "mscdex", that is used to access and assign a drive letter for a DOS CD-ROM. SCO Merge only allows access to a single CD-ROM with that utility. By default, SCO Merge accesses the first or primary Unix CD-ROM (/dev/cd0).
How do I access a CD-ROM from MS Windows or DOS with SCO Merge?
How do I access a CD-ROM other than the first or primary Unix CD-ROM with SCO Merge using mscdex?
Also, how do I access a second or multiple CD-ROMs from MS Windows or DOS with SCO Merge?
Solution
To access a CD-ROM from MS Windows or DOS with SCO Merge, use the following command from a DOS prompt or edit autoexec.bat with that command line:
mscdex /d:mergecd1The first or primary CD-ROM will by default be assigned drive letter "K":
MSCDEX Version 2.23 Copyright (c) Microsoft Corp. 1986-1993. All rights reserved Drive K: = Driver MERGECD1 unit 0
To access a CD-ROM other than the first or primary Unix CD-ROM with SCO Merge with mscdex, edit /etc/default/merge and modify the line "MERGE_CD_DEV_NAME=/dev/cd0" with the desired device node, such as "/dev/cd1", then start Merge/DOS or Merge/Windows.
To access a second or multiple CD-ROM from MS Windows or DOS with SCO Merge use the DOS "subst" command with the following steps:
1. Mount the CD-ROM with SCO UNIX before using the CD-ROM from DOS with the following Unix mount command:
mount -fDOS -olower /dev/<cd_device_node> /<mount_directory>Or, if the CD-ROM is High Sierra format, use this command:
mount -fHS -olower /dev/<cd_device_node> /<mount_directory>2. Start Merge/DOS and either use the DOS "subst" command at a DOS command line or edit autoexec.bat and use "subst" to assign a drive letter desired. For example, if the drive letter F: is available, add the following line to autoexec.bat:
subst F: D:\<mount_directory>where F: is the drive letter assigned to a directory on D:
drive. The "D:" drive is the Unix root directory, "/".NOTE: A default installation of Merge will limit the greatest drive letter
that can be assigned by "subst" to be H:. To use drive letters L:
through Z:, edit config.sys with a "lastdrive=Z" statement. Never
assign C:, D: or J: to any directory or mount-point, as those drive
letters are reserved for proper use of Merge. See also
man pages cdrom(HW), dos(MERGE);
DOS HELP SUBST