Technical article 109390

How to add an unsupported modem to the SCO Modem Manager.

OpenServer 5.0.4OpenServer 5.0.5UnixWare 7.0.0

Written · Last revised

Problem

My ELSA Microlink 28.8TQV Modem is neither supported under SCO OpenServer Release 5.0.4 nor UnixWare 7. How can I configure my modem successfully for these products?

Cause

SCO provides support for hundreds of modems via the graphical
configuration utility.  However, there are modems that are not
listed in the "scoadmin modem" Manager.

Solution

You can use the Modemmanager to manually add a modem. Use the "Standard Modem" entry for your unsupported ELSA.

However, if you want to have an entry in the Modemmanager for your ELSA Modem, and also want the Autodetection to work for your ELSA modem, there are several steps to follow:

The respective root directories for all the steps below are:

For UnixWare 7:   /etc/uucp
For OpenServer 5.0.4:   /usr/lib/uucp

1. Decide what to call the Dialer for your modem, for example:

elsa_microlink_288

2. Create or copy an existing modem configuration file and place it under /etc/uucp/default (for UW7). The format of this file is discussed in the atdialer(1bnu) man page.

Note that most of the parameters in this file have a default value, so you do not have to specify them. For example:

cp /etc/uucp/default/Standard_Modem  /etc/uucp/default/elsa_microlink_288

3. Using your preferred editor, change the "Vendor" and "Modem" line in the /etc/uucp/default/elsa_microlink_288 file. For example:

# Vendor: ELSA
# Modem: Microlink 28.8.TQV
MDM_SETUP=ATE0V1
MDM_SPEAKER=AT
MDM_DIALCMD=ATDT
MDM_HANGUP=ATH

Check your modem description to make sure that the above "AT" commands are supported by your modem. In this example, you do not need to change anything.

4. Edit the "/etc/uucp/DBase/Vendors" file and add an entry:

ELSA {ELSA}

Note: The string must match the string you've entered in the Vendor line in /etc/uucp/default/elsa_microlink_288, in this example, "ELSA".

5. Create a Vendor file "/etc/uucp/DBase/ELSA". (Note that this must also match the Vendor string in /etc/uucp/defaults/elsa_microlink_288.)

List all the models of your modem, one per line, in the following format:

{modem description} type {modem identification string}
For example:
elsa_microlink_288 {ELSA Microlink 288TQV} 01 {elsa_Modem_1 0}

You can now use "scoadmin modem" to manually configure your modem. There will be a new entry for "ELSA" in the Vendor list. If you click on it you will get the "Microlink 288TQV" entry.

6. As soon as you added the ELSA modem via scoadmin modem, you can connect to your modem via "cu". For example:

cu -l tty1A (SCO OpenServer) or cu -l term/00m (UnixWare7)

if you use COM1 for your modem.

7. Enable Autodetection.

Use your modem description to figure out which AT Command can be used to identify your Modem. For example, ATI6 returns MicroLink 28.8TQV.

Edit /etc/uucp/Detect file and add the Autodetection strings. For example:

elsa_microlink_288 {ATI6 MicroLink 28.8TQV}

The next time you invoke scoadmin modem, you should be able to autodetect your ELSA Microlink Modem.

From the Xinuos technical article database, record 109390. Reproduced with permission. The original is at www.sco.com/ta/109390, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.