Technical article 107563

How to configure an outgoing PPP connection with IP address negotiation

OpenServer 5.0.0

Written · Last revised

Problem

I want to connect to an Internet provider through a modem link and want IP address negotiation to take place, as my Internet provider cannot guarantee which system I will log into, and therefore the remote IP address is unknown at dial time.

Solution

Configure your PPP connection to be manual outgoing. Currently a transparent bring-up outgoing connection with IP address negotiation is not supported. This is scheduled for a future release. Any IP addresses which have to be negotiated should be assigned a value of 0.0.0.0 .

Here is an example of what can be entered into the different fields of the netconfig(ADM) PPP Link Configuration:

Attach name:            my_internet_provider
Local host name:        ppp-myhost
Host IP address:        186.145.20.120
Destination name:
Destination IP address: 0.0.0.0
Netmask:                255.255.255.0
UUCP destination name:  internet

In the above example your local host name and IP address has been assigned for you by your internet provider, but the machine you will connect to is unknown and the ip address will be negotiated.

If necessary you can also leave "Local host name:" blank and change
"Host IP address: "  to  "0.0.0.0".

To initiate the link use the following command:

$ pppattach attachname

where attachname is the name you specified during configuration in the attach field.

See also

pppattach(ADMN) netconfig(ADM) ppp(ADMN) ppp(ADMP);
SCO OpenServer Networking Guide

From the Xinuos technical article database, record 107563. Reproduced with permission. The original is at www.sco.com/ta/107563, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.